iOS의 NSURLConnection 및 기본 HTTP 인증

iOS의 NSURLConnection 및 기본 HTTP 인증

---

GET HTTP requestBasic 으로 이니셜을 호출해야합니다 Authentication. 이것은 요청이 서버로 처음 전송되는 것이며 이미 username & password서버에서 인증을 요청할 필요가 없습니다.

첫 번째 질문 :

1. 않습니다 NSURLConnection기본 인증을 수행하는 동기로 설정되어야한다? 이 게시물 의 답변에 따르면 비동기 경로를 선택하면 기본 인증을 할 수없는 것 같습니다.

2. 누구든지 GET request챌린지 응답없이 기본 인증을 설명하는 샘플 코드를 알고 있습니까? Apple의 문서 에 예제가 나와 있지만 서버가 클라이언트에 챌린지 요청을 보낸 후에 만 ​​해당됩니다.

저는 SDK의 네트워킹 부분이 새로워졌고이 작업을 수행하기 위해 사용해야하는 다른 클래스를 잘 모르겠습니다. ( NSURLCredential클래스가 보이지만 NSURLAuthenticationChallenge클라이언트가 서버에서 인증 된 리소스를 요청한 후에 만 사용되는 것 같습니다 .)

---

MGTwitterEngine 과 비동기 연결을 사용하고 있으며 다음 과 같이 NSMutableURLRequest( theRequest)에 권한을 설정합니다 .

NSString *authStr = [NSString stringWithFormat:@"%@:%@", [self username], [self password]];
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
NSString *authValue = [NSString stringWithFormat:@"Basic %@", [authData base64EncodingWithLineLength:80]];
[theRequest setValue:authValue forHTTPHeaderField:@"Authorization"];

이 방법이 챌린지 루프를 거쳐야한다고 생각하지는 않지만 틀릴 수 있습니다.

---

질문에 대답해도 외부 라이브러리가 필요하지 않은 솔루션을 제시하고 싶습니다. 다른 스레드에서 찾았습니다.

// Setup NSURLConnection
NSURL *URL = [NSURL URLWithString:url];
NSURLRequest *request = [NSURLRequest requestWithURL:URL
                                         cachePolicy:NSURLRequestUseProtocolCachePolicy
                                     timeoutInterval:30.0];

NSURLConnection *connection = [[NSURLConnection alloc] initWithRequest:request delegate:self];
[connection start];
[connection release];

// NSURLConnection Delegates
- (void)connection:(NSURLConnection *)connection didReceiveAuthenticationChallenge:(NSURLAuthenticationChallenge *)challenge {
    if ([challenge previousFailureCount] == 0) {
        NSLog(@"received authentication challenge");
        NSURLCredential *newCredential = [NSURLCredential credentialWithUser:@"USER"
                                                                    password:@"PASSWORD"
                                                                 persistence:NSURLCredentialPersistenceForSession];
        NSLog(@"credential created");
        [[challenge sender] useCredential:newCredential forAuthenticationChallenge:challenge];
        NSLog(@"responded to authentication challenge");    
    }
    else {
        NSLog(@"previous authentication failure");
    }
}

- (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response {
    ...
}

- (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data {
    ...
}

- (void)connectionDidFinishLoading:(NSURLConnection *)connection {
    ...
}

- (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error {
    ...
}

---

다음은 타사가 관여하지 않은 자세한 답변입니다.

여기에서 확인하십시오 :

//username and password value
NSString *username = @“your_username”;
NSString *password = @“your_password”;

//HTTP Basic Authentication
NSString *authenticationString = [NSString stringWithFormat:@"%@:%@", username, password]];
NSData *authenticationData = [authenticationString dataUsingEncoding:NSASCIIStringEncoding];
NSString *authenticationValue = [authenticationData base64Encoding];

//Set up your request
NSMutableURLRequest *request = [[NSMutableURLRequest alloc] initWithURL:[NSURL URLWithString:@"http://www.your-api.com/“]];

// Set your user login credentials
[request setValue:[NSString stringWithFormat:@"Basic %@", authenticationValue] forHTTPHeaderField:@"Authorization"];

// Send your request asynchronously
[NSURLConnection sendAsynchronousRequest:request queue:[NSOperationQueue mainQueue] completionHandler:^(NSURLResponse *responseCode, NSData *responseData, NSError *responseError) {
      if ([responseData length] > 0 && responseError == nil){
            //logic here
      }else if ([responseData length] == 0 && responseError == nil){
             NSLog(@"data error: %@", responseError);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"Error accessing the data" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }else if (responseError != nil && responseError.code == NSURLErrorTimedOut){
             NSLog(@"data timeout: %@”, NSURLErrorTimedOut);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"connection timeout" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }else if (responseError != nil){
             NSLog(@"data download error: %@”,responseError);
             UIAlertView *alert = [[UIAlertView alloc] initWithTitle:nil message:@"data download error" delegate:nil cancelButtonTitle:@"Close" otherButtonTitles:nil];
             [alert show];
             [alert release];
      }
}]

이에 대한 귀하의 의견을 알려주십시오.

감사

---

If you don't want to import the whole of MGTwitterEngine and you aren't doing an asynchronous request Then you can use http://www.chrisumbel.com/article/basic_authentication_iphone_cocoa_touch

To base64 encode the Username and password So replace

NSString *authValue = [NSString stringWithFormat:@"Basic %@", [authData base64EncodingWithLineLength:80]];

with

NSString *encodedLoginData = [Base64 encode:[loginString dataUsingEncoding:NSUTF8StringEncoding]];

after

you will need to include the following file

static char *alphabet = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";

@implementation Base64
+(NSString *)encode:(NSData *)plainText {
    int encodedLength = (((([plainText length] % 3) + [plainText length]) / 3) * 4) + 1;
    unsigned char *outputBuffer = malloc(encodedLength);
    unsigned char *inputBuffer = (unsigned char *)[plainText bytes];

    NSInteger i;
    NSInteger j = 0;
    int remain;

    for(i = 0; i < [plainText length]; i += 3) {
        remain = [plainText length] - i;

        outputBuffer[j++] = alphabet[(inputBuffer[i] & 0xFC) >> 2];
        outputBuffer[j++] = alphabet[((inputBuffer[i] & 0x03) << 4) | 
                                     ((remain > 1) ? ((inputBuffer[i + 1] & 0xF0) >> 4): 0)];

        if(remain > 1)
            outputBuffer[j++] = alphabet[((inputBuffer[i + 1] & 0x0F) << 2)
                                         | ((remain > 2) ? ((inputBuffer[i + 2] & 0xC0) >> 6) : 0)];
        else 
            outputBuffer[j++] = '=';

        if(remain > 2)
            outputBuffer[j++] = alphabet[inputBuffer[i + 2] & 0x3F];
        else
            outputBuffer[j++] = '=';            
    }

    outputBuffer[j] = 0;

    NSString *result = [NSString stringWithCString:outputBuffer length:strlen(outputBuffer)];
    free(outputBuffer);

    return result;
}
@end

---

Since NSData::dataUsingEncoding is deprecated (ios 7.0), you could use this solution:

// Forming string with credentials 'myusername:mypassword'
NSString *authStr = [NSString stringWithFormat:@"%@:%@", username, password];
// Getting data from it
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
// Encoding data with base64 and converting back to NSString
NSString* authStrData = [[NSString alloc] initWithData:[authData base64EncodedDataWithOptions:NSDataBase64EncodingEndLineWithLineFeed] encoding:NSASCIIStringEncoding];
// Forming Basic Authorization string Header
NSString *authValue = [NSString stringWithFormat:@"Basic %@", authStrData];
// Assigning it to request
[request setValue:authValue forHTTPHeaderField:@"Authorization"];

---

If you are using GTMHTTPFetcher for your connection, basic authentication is fairly easy as well. You simply need to provide the credential to the fetcher before beginning the fetch.

NSString * urlString = @"http://www.testurl.com/";
NSURL * url = [NSURL URLWithString:urlString];
NSMutableURLRequest * request = [NSMutableURLRequest requestWithURL:url];

NSURLCredential * credential = [NSURLCredential credentialWithUser:@"username" password:@"password" persistence:NSURLCredentialPersistenceForSession];

GTMHTTPFetcher * gFetcher = [GTMHTTPFetcher fetcherWithRequest:request];
gFetcher.credential = credential;

[gFetcher beginFetchWithDelegate:self didFinishSelector:@selector(fetchCompleted:withData:andError:)];

---

Can you tell me what's the reason behind limiting the encoding line length to 80 in your example code? I thought that HTTP headers have a max length of something like 4k (or maybe some servers don't take anything longer than that). – Justin Galzic Dec 29 '09 at 17:29

It is not limiting to 80, it is an option of the method base64EncodingWithLineLength in NSData+Base64.h/m, where you can split your encoded string into multiple lines, which is useful for other application, such as nntp transmission. I believe 80 is chosen by the twitter engine author to be a length big enough to accommodate most user/password encoded result to one line.

---

You can use AFNetworking (it is opensource), here is code that worked for me. This code sends file with basic authentication. Just change url, email and password.

NSString *serverUrl = [NSString stringWithFormat:@"http://www.yoursite.com/uploadlink", profile.host];
NSMutableURLRequest *request = [[AFHTTPRequestSerializer serializer] requestWithMethod:@"POST" URLString:serverUrl parameters:nil error:nil];


NSURLSessionConfiguration *configuration = [NSURLSessionConfiguration defaultSessionConfiguration];
AFURLSessionManager *manager = [[AFURLSessionManager alloc] initWithSessionConfiguration:configuration];

// Forming string with credentials 'myusername:mypassword'
NSString *authStr = [NSString stringWithFormat:@"%@:%@", email, emailPassword];
// Getting data from it
NSData *authData = [authStr dataUsingEncoding:NSASCIIStringEncoding];
// Encoding data with base64 and converting back to NSString
NSString* authStrData = [[NSString alloc] initWithData:[authData base64EncodedDataWithOptions:NSDataBase64EncodingEndLineWithLineFeed] encoding:NSASCIIStringEncoding];
// Forming Basic Authorization string Header
NSString *authValue = [NSString stringWithFormat:@"Basic %@", authStrData];
// Assigning it to request
[request setValue:authValue forHTTPHeaderField:@"Authorization"];

manager.responseSerializer = [AFHTTPResponseSerializer serializer];

NSURL *filePath = [NSURL fileURLWithPath:[url path]];
NSURLSessionUploadTask *uploadTask = [manager uploadTaskWithRequest:request fromFile:filePath progress:^(NSProgress * _Nonnull uploadProgress) {
// This is not called back on the main queue.
// You are responsible for dispatching to the main queue for UI updates
     dispatch_async(dispatch_get_main_queue(), ^{
                //Update the progress view
                LLog(@"progres increase... %@ , fraction: %f", uploadProgress.debugDescription, uploadProgress.fractionCompleted);
            });
        } completionHandler:^(NSURLResponse *response, id responseObject, NSError *error) {
            if (error) {
                NSLog(@"Error: %@", error);
            } else {
                NSLog(@"Success: %@ %@", response, responseObject);
            }
        }];
[uploadTask resume];

참고URL : https://stackoverflow.com/questions/1973325/nsurlconnection-and-basic-http-authentication-in-ios