SSH 키 : " 'id_rsa.pub'에 대한 권한 0644가 너무 열려 있습니다."

SSH 키 : " 'id_rsa.pub'에 대한 권한 0644가 너무 열려 있습니다." 맥에서

---

내 Mac에서 ssh 키 페어를 생성하고 공개 키를 내 우분투 서버 (사실 내 맥의 가상 컴퓨터)에 추가하지만 우분투 서버에 로그인하려고하면 다음과 같이 말합니다.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@         WARNING: UNPROTECTED PRIVATE KEY FILE!          @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Permissions 0644 for '/Users/tudouya/.ssh/vm/vm_id_rsa.pub' are too open.
It is required that your private key files are NOT accessible by others.
This private key will be ignored.
bad permissions: ignore key: /Users/tudouya/.ssh/vm/vm_id_rsa.pub
Permission denied (publickey,password).

이 문제를 해결하고 키 파일 모드를 변경하고 폴더 모드를 변경하는 여러 가지 방법을 시도했지만 stackoverflow에 대한 답변으로 작동하지 않습니다.
키 파일 권한 :

vm dir:
drwxr-xr-x   4 tudouya  staff    136  4 29 10:37 vm

key file:
-rw-------  1 tudouya  staff  1679  4 29 10:30 vm_id_rsa
-rw-r--r--  1 tudouya  staff   391  4 29 10:30 vm_id_rsa.pub

나에게 몇 가지 아이디어를 적어주세요 ... =========================================

I ssh_config에 호스트 정보를 작성하십시오.

Host ubuntuvm
    Hostname 10.211.55.17
    PreferredAuthentications publickey
    IdentityFile /Users/tudouya/.ssh/vm/vm_id_rsa.pub

"ssh -v ubuntuvm"명령을 실행하면 다음이 표시됩니다.

ssh -v ubuntuvm
OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011
debug1: Reading configuration data /etc/ssh_config
debug1: /etc/ssh_config line 20: Applying options for *
debug1: /etc/ssh_config line 103: Applying options for *
debug1: /etc/ssh_config line 175: Applying options for ubuntuvm
debug1: Connecting to 10.211.55.17 [10.211.55.17] port 22.
debug1: Connection established.
debug1: identity file /Users/tudouya/.ssh/vm/vm_id_rsa.pub type 1
debug1: identity file /Users/tudouya/.ssh/vm/vm_id_rsa.pub-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.2
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1p1 Ubuntu-8
debug1: match: OpenSSH_6.6.1p1 Ubuntu-8 pat OpenSSH*
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-ctr hmac-md5-etm@openssh.com none
debug1: kex: client->server aes128-ctr hmac-md5-etm@openssh.com none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA 55:6d:4f:0f:23:51:ac:8e:70:01:ec:0e:62:9e:1c:10
debug1: Host '10.211.55.17' is known and matches the RSA host key.
debug1: Found key in /Users/tudouya/.ssh/known_hosts:54
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /Users/tudouya/.ssh/vm/vm_id_rsa.pub
debug1: Server accepts key: pkalg ssh-rsa blen 279
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@         WARNING: UNPROTECTED PRIVATE KEY FILE!          @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Permissions 0644 for '/Users/tudouya/.ssh/vm/vm_id_rsa.pub' are too open.
It is required that your private key files are NOT accessible by others.
This private key will be ignored.
bad permissions: ignore key: /Users/tudouya/.ssh/vm/vm_id_rsa.pub
debug1: No more authentication methods to try.
Permission denied (publickey,password).

---

debug1: identity file /Users/tudouya/.ssh/vm/vm_id_rsa.pub type 1

It appears that you're trying to use the wrong key file. The file with the ".pub" extension is the public key file. The corresponding file without the ".pub" extension is the private key file. When you run an ssh client to connect to a remote server, you have to provide the private key file to the ssh client.

You probably have a line in the your .ssh/config file (or /etc/ssh_config) which looks like this:

IdentityFile .../.ssh/vm/vm_id_rsa.pub

You need to remove the ".pub" extension from the filename:

IdentityFile .../.ssh/vm/vm_id_rsa

---

I suggest you do:

chmod 400 ~/.ssh/id_rsa

For me work's fine.

---

chmod 400 path/to/filename

This work for me. When I did this file I am able to connect to my EC2 instance

---

Key should be readable by the logged in user.

Try this:

cd ~/.ssh
chmod 400 ~/.ssh/Key file
chmod 400 ~/.ssh/vm_id_rsa.pub

---

In my case, it was a .pem file. Turns out holds good for that too. Changed permissions of the file and it worked.

chmod 400 ~/.ssh/dev-shared.pem

Thanks for all of those who helped above.

---

If the keys are in the ~/.ssh directory , use

chmod 400 ~/.ssh/id_rsa

If the keys are in different directory, use

chmod 400 directory_path/id_rsa

This worked for me.

---

After running below command it works for me

sudo chmod 600 /path/to/my/key.pem

---

Lot's of similar answers but no explanations...

The error is thrown because the private key file permissions are too open. It is a security risk.

Change the permissions on the private key file to be minimal (read only by owner)

1. Change owner chown <unix-name> <private-key-file>
2. Set minimal permissions (read only to file owner) chmod 400 <private-key-file>

---

As for me, the default mode of id_rsa is 600, which means readable and writable.

After I push this file to a git repo and pull it from another pc, sometimes the mode of the private key file becomes -rw-r--r--.

When I pull the repo with ssh after specify the private key file, it failed and prompted warnings the same with you. Following is my script.

ssh-agent bash -c "ssh-add $PATH_OF_RSA/id_rsa; \
git pull git@gitee.com:someone/somerepo.git "

I fix this problem just by changing the mode to 600.

chmod 600 $PATH_TO_RSA/id_rsa

---

giving permision 400 makes the key private and not accessible by someone unknown. It makes the key as a protected one.

chmod 400 /Users/tudouya/.ssh/vm/vm_id_rsa.pub

---

If youre using a .ssh/config file try to

chmod 0400 .ssh/config

then:

chmod 0400 .ssh/<<KEYFILE_PATH>>

---

Those who suggested chmod 400 id_rsa.pub did not sound right at all. It was quite possible that op used pub key instead of private key to ssh.

So it might be as simple as ssh -i /Users/tudouya/.ssh/vm/vm_id_rsa (the private key) user@host to fix it.

--- update ---

Check this article https://www.digitalocean.com/community/tutorials/how-to-set-up-ssh-keys--2 for how to set up ssh key

---

chmod 400 /etc/ssh/* works for me.

---

Just run below to your pem's

sudo chmod 600 /path/to/my/key.pem 

---

I removed the .pub file, and it worked.

참고URL : https://stackoverflow.com/questions/29933918/ssh-key-permissions-0644-for-id-rsa-pub-are-too-open-on-mac